Valve Assembly, Main Gas Control, Dr. Oligo, Comes with fittings, connector and mounting hardware.
This product is obsolete and is replaced by PN: 615-104710. Please purchase this new replacement part if you need a new Main Gas valve for your Dr. Oligo.
See Upgrade kit PN: 351-105012 for the entire kit to change all the gas valves at one time.
To get individual valves you will need to purchase a starter kit which is PN: 347-105571
The reason for the starter kit is that these new gas valves are pneumatically operated which requires a gas pressure source so the starter kit installs a regulator, gauge and some tubing on the instrument
Then you will need to buy the individual valve you need.
Pneumatic Valve Assembly Main Gas for the Dr. Oligo : Part Number: 615-104710
Pneumatic Valve Assembly Hi Drain for the Dr. Oligo: Part Number: 615-104711
Pneumatic Valve Assembly Push Drain for the Dr. Oligo: Part Number: 615-104712
Over Pressure Pneumatic Valve Assembly for the Dr. Oligo: Part Number: 615-104714
Pneumatic Valve Assembly Vent for the Dr. Oligo: Part Number: 615-105009
The reason we had to discontinue the original gas valves are due to poor quality from the manufacturer. The quality is so poor that we cannot guarantee that the valves will work when they arrive and if they do work on arrival they will likely fail within a month.
We researched an alternative pneumatic valve we offer now. We started using the new pneumatic valve in mid 2014. They have been in use since then with very good success. They do not have any adverse effect on the gas flow path and they are very stable. You can count on the working every time they are called on during the synthesis.
This item is obsolete. It has been replaced by PN:
615-104710.
Please Log in first to Rate the Product